Sun Fire V240 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Applies to:

Goal

How to Remove and Replace a Sun Fire V210/240 DVD

***********************************************************************************
To report errors or request improvements on this procedure, please put a comment on Doc ID: 1270946.1
***********************************************************************************

 

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS ARE REQUIRED?: No special skills required, Customer Replaceable Unit (CRU) procedure

TIME ESTIMATE: 30 minutes

Task Complexity: 0

REMOVAL/REPLACEMENT INSTRUCTIONS

PROBLEM OVERVIEW: DVD drive failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

The system should be powered down.

WHAT ACTIONS ARE REQUIRED:

Follow standard ESD procedures to avoid Electrostatic Discharge

Replacing the DVD drive

1. Power down the server

2. Open the bezel

3. Unclip the catches that fasten the DVD drive to the chassis

4. Pull the DVD drive towards you until it is free of its connectors and out of the chassis

5. Insert the new DVD drive

6. Press it home firmly until the clips engage with the server's chassis

7. Close the bezel 

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTIONS ARE REQUIRED TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart software applications per applicable administration guides to resume system operation. 

PARTS DETAILS:

Sun Fire V240

https://support.oracle.com/handbook_partner/Systems/SunFireV240/components.html

Sun Fire V240 (post July 2006)

https://support.oracle.com/handbook_partner/Systems/SunFireV240_R/components.html

Reference Information:
- V210/240 replaceable components

Save

This solution has no attachment