Sun Fire V240 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 
Microlearning>Video>ML-VID-VCAP
 

In this Document

Goal

Solution

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: FRU CAP

Applies to:

Goal

How to Remove and Replace a Sun Fire V210/240 Battery

********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1270934.1
********************************************************************************

Solution

PROBLEM OVERVIEW:
Real time clock battery dead. 

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 1

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Power down system.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
1. Take ESD precautions and ensure system is powered off.

2. Open back of system cover.

3. Unclip and remove battery from system board.

4. Insert new battery

5. Close back of system cover.

7. Power up system.

8. Set Time Of Date . 


WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Boot Operating system and verify Time Of Date . After verifying TOD correct, start applications.

PARTS NOTE:
When replacing battery, use only identical replacement part.

https://support.oracle.com/handbook_partner/Systems/SunFireV240_R/components.html#Batteries

https://support.oracle.com/handbook_partner/Systems/SunFireV240/components.html#Batteries

ADDITIONAL COMMENTS:
Sun Fire V210 and V240 Servers Service Manual 819-4207.

Save

This solution has no attachment