| Asset ID: |
1-71-1021104.1 |
| Update Date: | 2017-05-12 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1021104.1
:
How to verify Sun Storage[TM] Array Tray Type via the User Interface
| Related Items |
- Sun Storage B220 Disk Subsystem
- Sun Storage 6180 Array
- Sun Storage 6580 Array
- Sun Storage Flexline 280 Array
- Sun Storage D178 Disk Subsystem
- Sun Storage 2540-M2 Array
- Sun Storage 6780 Array
- Sun Storage D173 Disk Subsystem
- Sun Storage 2510 Array
- Sun Storage 2540 Array
- Sun Storage 6140 Array
- Sun Storage Flexline 210 Array
- Sun Storage B280 Array
- Sun Storage D220 Disk Subsystem
- Sun Storage Flexline 380 Array
- Sun Storage 2530-M2 Array
- Sun Storage 2530 Array
- Sun Storage D240 (STK) Array
- Sun Storage 6540 Array
- Sun Storage Flexline 240 Array
- Sun Storage D280 Disk Subsystem
- Sun Storage 6130 Array
|
| Related Categories |
- PLA-Support>Sun Systems>DISK>Arrays>SN-DK: 6130
- _Old GCS Categories>Sun Microsystems>Storage - Disk>Modular Disk - Other
|
PreviouslyPublishedAs
270869
Applies to:
Sun Storage Flexline 280 Array - Version Not Applicable and later
Sun Storage Flexline 380 Array - Version Not Applicable and later
Sun Storage B220 Disk Subsystem - Version Not Applicable and later
Sun Storage 2530-M2 Array - Version Not Applicable and later
Sun Storage 2540-M2 Array - Version Not Applicable and later
All Platforms
Goal
The purpose of this document is to describe how to identify the tray type of a given tray for a Storage[TM], StorageTek[TM], or StorEdge[TM], array, using the management interface software Common Array Manager or SANtricity Storage Manager.
Solution
Use the steps below to identify your storage tray based on the interface(graphical or command line) and the management software(CAM or SANtricity).
Using the CAM BUI:
1. Open a browser to the CAM host: https://cam_server:6789
2. Under the "Storage System Summary" area click on the array name.
- If the array is listed as unresponsive, you may have a communication issue. Please correct this prior to proceeding. Reference <Document: 1007046.1>Sun Storage 2500, 2500-M2, 6000 and Flexline Arrays: Troubleshooting Management Communication Faults.
3. Select 'Physical Devices' and then the 'Trays' tab.
4. Note the information in the 'Tray Type' column.
If the tray type is a CSM100, you need to use the CLI to determine whether it is a legacy StorageTek tray type(FLA200, FLA300, or FLC200)
5. Use the table below to determine tray type
Using the CAM sscs CLI:
1. List managed arrays:
sscs list array
2. List tray information
sscs list -d -t iom fru Tray.XX.IOM.A
- If the array is listed as unresponsive, you may have a communication issue. Please correct this prior to proceeding. Reference <Document: 1007046.1>Troubleshooting Sun StorageTek[TM], Sun StorEdge[TM], and Sun Storage[TM] Management Communication Faults with Arrays.
3. Note the 'Model' field.
4. Use the table below to determine tray type
Using the SANtricity GUI:
1. Start SANtricity and Open the Array Management Window by double clicking on the array name.
- If the array is listed as unresponsive, you may have a communication issue. Please correct this prior to proceeding. Reference <Document: 1007046.1>Troubleshooting Sun StorageTek[TM], Sun StorEdge[TM], and Sun Storage[TM] Management Communication Faults with Arrays.
2. In the Physical window there will be a Battery/Fan Status Icon for the given tray.
3. Look at the Product ID in that field
4. Use the table below to determine tray type
Using SANtricity SMcli:
1. List available arrays:
SMcli -d -i
- If the array is listed as unresponsive, you may have a communication issue. Please correct this prior to proceeding. Reference <Document: 1007046.1>Troubleshooting Sun StorageTek[TM], Sun StorEdge[TM], and Sun Storage[TM] Management Communication Faults with Arrays.
2. From a command prompt, type the following:
SMcli -n -c "show storageArray profile;"
3. Scroll through the output(it can be quite lengthy) and look at the TRAYS---- section. Look for the Product ID in that field.
4. Use the table below to determine the Tray type
| Product(SANtricity)/Model(CAM) field |
Tray Type |
IOM/ESM
Firmware |
Number of Drives |
Drive Types |
| CSM100_E_S |
CSM100 SATA |
97xx |
14 |
SATA Only |
| CSM100_E_F |
CSM100 FC |
96xx |
14 |
FC Only |
| SYM2600FC |
FLA200 |
93xx |
14 |
FC Only |
| SYM2610FC |
FLA300 |
96xx |
14 |
FC Only |
| SYM2655FC |
FLC200 iSATA |
97xx |
14 |
SATA Only |
| SYM2655FC |
FLC200 dSATA |
95xx |
14 |
SATA Only |
| CSM200_E |
CSM200 |
98xx |
16 |
FC, SATA, Solid State |
| LCSM100_E |
LCSM100 |
01xx |
12 |
SAS or SATA |
| LCSM100_E |
LCSM100 M2 |
03xx |
12 |
SAS |
| BladeDisk B150 |
B150 |
040x |
10 blades |
SATA |
| BladeDisk B250 |
B250 |
050x |
10 blades |
SATA |
If the drive is part of the same tray as the RAID controllers, the tray type for the base tray differs by array type.
Reference <Document: 1021066.1> Verify Sun Storage[TM] Array Array Type via the User Interface
| Array Model | Drive Tray Type |
|---|
| 2510 |
LCSM100 |
| 2530 |
LCSM100 |
| 2540 |
LCSM100 |
| 2530-M2 |
LCSM100 M2 |
| 2540-M2 |
LCSM100 M2 |
| 6130 |
CSM100 FC |
| 6140 |
CSM200 |
| 6180 |
CSM200 |
| Flexline 210 |
FLC200 |
| Flexline 240 |
FLA200 |
| D-Series D220 |
FLA200 |
| D-Series D240 |
FLA200 |
| B-Series B220 |
FLA200 |
Internal Comments
This document contains normalized content and is managed by the the Domain Lead
(s) of the Midrange Domain. To notify content owners of a knowledge gap
contained in this document, and/or prior to updating this document, please
add a comment to the document.
tray, type, cam, santricity, array, type, 6180, 280, 380, 240, 6130, 6140, 6540, 2500, 6000, 2510, 2530, 2540, 6580, 6780, normalized
Attachments
This solution has no attachment
