SL3000 - CAP Label Information

Asset ID:	1-71-1019423.1
Update Date:	2017-08-07
Keywords:

Solution Type Technical Instruction Sure

Solution 1019423.1 : SL3000 - CAP Label Information

Applies to:

Sun StorageTek SL3000 Modular Library System - Version Not Applicable and later
All Platforms

Goal

Label set is to identify the CAP address on SL3000

Engineering has added the label set to the BDM Installation kit and CAP conversion kits.

Solution

These labels are placed on the decorative cover (outside above CAP) over the CAP motor.
(See small rectangular recess on cover)
Note: There are 3 columns of labels.

-First column the labels are blank so the user can create there own labels.
-Second column is for the SCSI address
-Third column is for the HLI address.

Note: On the right side of the label set it notes where and what label to use based on the host they are using and the library configuration.

These labels are not mandatory to install unless the user wants to use them.

Attachments

This solution has no attachment