How to Connect to the CMM ILOM using a Serial Connection on a Sun Blade 6000/6048

Asset ID:	1-71-1019314.1
Update Date:	2018-04-20
Keywords:

Solution Type Technical Instruction Sure

Solution 1019314.1 : How to Connect to the CMM ILOM using a Serial Connection on a Sun Blade 6000/6048

Applies to:

Sun Blade T6320 Server Module - Version All Versions to All Versions [Release All Releases]
Sun Blade X6450 Server Module - Version All Versions to All Versions [Release All Releases]
Sun Blade 6048 System - Version All Versions to All Versions [Release All Releases]
Sun Blade T6300 Server Module - Version All Versions to All Versions [Release All Releases]
Sun Blade X6220 Server Module - Version All Versions to All Versions [Release All Releases]
All Platforms
***Checked for relevance on 06-Jun-2014***

Goal

This document describes the procedure for accessing the CMM ILOM on the Sun Blade 6000 and 6048 chassis.

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Sun x86 Systems

Symptoms:

Cannot access ILOM on any blade
Cannot access CMM
CMM or ILOMs not responding to external commands

Purpose/Scope:

This document gives details on how to login to the CMM ILOM on the Sun Blade 6000/6048 Chassis

Solution

Steps to Follow

Steps to connect to the Chassis Monitoring Module (CMM) on a Sun Blade 6000/6048 chassis

You can access the CMM ILOM at any time by connecting a terminal or a PC running terminal emulation software to the serial connector on the chassis.

1. Verify that your terminal, laptop, or terminal server is operational.

2. Configure that terminal device or the terminal emulation software to use the following settings:

8N1: eight data bits, no parity, one stop bit
9600 baud
Disable software flow control (XON/XOFF)

3. Connect a serial cable from the serial port (SER MGT) on the chassis panel to a terminal device using Sun Part# 530-3813 "DB9F to RJ45F, DCE Adapter"

4. Press Enter on the terminal device.

This establishes the connection between the terminal device and the CMM ILOM.

5. Log in to the CLI:

a. Type the default user name root

b. Type the default password changeme

When you have successfully logged in, the CMM ILOM displays the default command prompt:

->

The CMM ILOM is running the CLI. You can now run CLI commands.

6. To log out, type exit

For additional information on using the CMM connection on the Sun Blade 6000/6048 please refer to the:

Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems

available in the Oracle Integrated Lights Out Manager (ILOM) 3.0 Documentation

Attachments

This solution has no attachment