SL8500 - Front Door Adjustment Process

Asset ID:	1-71-1017380.1
Update Date:	2017-09-20
Keywords:

Solution Type Technical Instruction Sure

Solution 1017380.1 : SL8500 - Front Door Adjustment Process

Related Items


Sun StorageTek SL8500 Modular Library System

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library

PreviouslyPublishedAs
228457

Oracle Confidential PARTNER - Available to partners (SUN).
Reason: Confidential for Partners and Oracle Support personnel

Applies to:

Sun StorageTek SL8500 Modular Library System - Version Not Applicable and later
All Platforms

Goal

Revised Front Door Adjustment Process.

Solution

Refer to the attached document for the Revised Front Door Adjustment Process.

Note: This is a revised version for adjusting the front doors of the SL8500. For the most current version, refer to the Installation Manual. This came out of an investigation into a problem at a major account. The 48v bounced momentarily and booted the bots and HBZ card. Found the original latch pawl adjustment tool did not work and should not be used.

A bad/shorted/loose cable harness going to the door switches or HBN card carrying 48v's can cause the same symptoms and probably to a lesser degree defective door switches are possible.

Attachments

This solution has no attachment