Tape - What Is FCP-2 Protocol

Asset ID:	1-71-1016456.1
Update Date:	2017-08-31
Keywords:

Solution Type Technical Instruction Sure

Solution 1016456.1 : Tape - What Is FCP-2 Protocol

Related Items


IBM LTO4 Tape Drive
 IBM LTO3 Tape Drive
 Sun StorageTek 9940A Tape Drive
 Sun StorageTek 9840A Tape Drive
 Sun StorageTek 9840D Tape Drive
 Sun StorageTek 9940B Tape Drive
 IBM LTO5 Tape Drive
 Sun StorageTek 9840B Tape Drive
 Sun StorageTek 9840C Tape Drive

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive
 _Old GCS Categories>Sun Microsystems>Storage - Tape>Drives - 9940

PreviouslyPublishedAs
226204

Applies to:

Sun StorageTek 9940A Tape Drive - Version Not Applicable to Not Applicable [Release N/A]
IBM LTO4 Tape Drive - Version Not Applicable and later
Sun StorageTek 9940B Tape Drive - Version Not Applicable and later
IBM LTO5 Tape Drive - Version Not Applicable and later
IBM LTO3 Tape Drive - Version Not Applicable and later
All Platforms

Goal

What Is FCP-2 Protocol?

FCP-2 defines the second generation Fibre Channel Protocol to be used to transport SCSI commands over the T11 Fibre Channel interface.

Solution

Steps to Follow
A white paper created by T-11, the Fibre channel standards committee, can be found at:
FCP-2 Document Once the homepage has been acquired, select "Architecture" on left side tool bar then scroll down the page until you locate the Fibre Channel documents. The FCP White Papers are located there.

Attachments

This solution has no attachment