VOP - What TCP/IP Ports are Used for VOP (Virtual Operator Panel)

Asset ID:	1-71-1015319.1
Update Date:	2017-05-19
Keywords:

Solution Type Technical Instruction Sure

Solution 1015319.1 : VOP - What TCP/IP Ports are Used for VOP (Virtual Operator Panel)

Related Items


StorageTek T10000C Tape Drive
 Sun StorageTek 9840D Tape Drive
 Sun StorageTek T10000A Tape Drive
 Sun StorageTek T10000B Tape Drive
 Sun StorageTek 9940B Tape Drive
 Sun StorageTek 9840B Tape Drive
 Sun StorageTek 9840C Tape Drive

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive

PreviouslyPublishedAs
223358

Applies to:

Sun StorageTek 9840B Tape Drive - Version Not Applicable and later
Sun StorageTek 9840C Tape Drive - Version Not Applicable and later
Sun StorageTek 9840D Tape Drive - Version Not Applicable and later
Sun StorageTek 9940B Tape Drive - Version Not Applicable and later
StorageTek T10000C Tape Drive - Version Not Applicable and later
All Platforms

Goal

What TCP/IP ports are used for VOP
What TCP/IP ports are used for Virtual Operator Panel

Solution

Refer to the following for further information:

Oracle® StorageTek Virtual Operator Panel
Security Guide
2.0
E37312-01
September 2012

http://docs.oracle.com/cd/E37055_01/en/E37312_01/E37312_01.pdf

For legacy tape drives (for example, StorageTek 9840D, T10000C, IBM LTO5, HP LTO5, and earlier) the protocols used are telnet (port 23) and FTP (port 20, 21), which are unencrypted.
Beginning with this release (VOP 2.0), and future drives which support it, SSH and SFTP are the defaults.

Also default port open on VOP is 22.

VOP can be found here:

https://sac.us.oracle.com/pls/FTP/search_p.search

Attachments

This solution has no attachment