Lxxx - Pinout for Cable to Connect to the CSE Port

Asset ID:	1-71-1014033.1
Update Date:	2017-11-14
Keywords:

Solution Type Technical Instruction Sure

Solution 1014033.1 : Lxxx - Pinout for Cable to Connect to the CSE Port

Applies to:

Sun StorageTek L1400 Tape Library - Version Not Applicable and later
Sun StorageTek L180 Tape Library - Version Not Applicable and later
Sun StorageTek L20 Tape Library - Version Not Applicable and later
Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L40 Tape Library - Version Not Applicable and later
All Platforms

Goal

Pinout for Cable to Connect to the CSE Port.

Solution

Hyperterm port settings:

Set port setting to:

Baud rate: 38400,

Data bits : 8,

Parity Bit: None,

Stop Bit: 1,

Direct to comm. flow: None or xon/xoff

Steps to Follow
Pin-out Information:
DB-9 Female          Line Name                    RJ45
            1                  Carrier Detect               No Conn
            2                  Receive Data                4
            3                  Transmit Data               6
            4                  Data Term Ready          3 & 8
            5                  Signal Ground               5
            6                  Data Set Ready             2
            7                  Request to Send            7
            8                  Clear to Send                1
            9                  Ring Indicate                No Conn

SL3000 - Part Number/Cable Diagram for SL3000 Serial Cable (Doc ID 1326969.1)

Attachments

This solution has no attachment