Sun Microsystems, Inc.  Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1013880.1
Update Date:2017-08-30
Keywords:
Solution Type  Technical Instruction Sure

Solution  1013880.1 :   L700/180 - How to Identify what Type of SCSI Interface is Being Used  

Related Items 
    

  • Sun StorageTek L180 Tape Library
    •  
  • Sun StorageTek L700 Tape Library
    •  
Related Categories 
    

  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library
    •  

PreviouslyPublishedAs
219895 


Applies to:  

Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L180 Tape Library - Version Not Applicable and later
All Platforms



Goal


How to Identify what Type of SCSI Interface is Being Used in the library.


Solution


Procedure can be found in the "L700e Tape Library and L700-Pass-Thru Port Operator's Guide". 
 
 Steps to Follow
 How to Identify what Type of SCSI Interface is Being Used:


    

  1. Power the library on if it isn't already. Wait for it to finish initializing.
    2. 

  2. Press the "Menu" button and arrow down until you see "Lib Info Config".
    3. 

  3. Press the "Select" button to select "Lib Info Config" and arrow down until you see "Lib SCSI I/F".
    4. 

  4. Select "Lib SCSI I/F" and there you should see what SCSI interface is installed on the library. It will either be HVD or LVD.
    5. 




Attachments

This solution has no attachment


















       

Copyright © 2018 Oracle, Inc.  All rights reserved.

 Feedback