L180/700 - How to Determine the Remaining Number of Cleans Left on a Cleaning Tape in an L-Series Library

Asset ID:	1-71-1013751.1
Update Date:	2017-08-30
Keywords:

Solution Type Technical Instruction Sure

Solution 1013751.1 : L180/700 - How to Determine the Remaining Number of Cleans Left on a Cleaning Tape in an L-Series Library

Applies to:

Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L180 Tape Library - Version Not Applicable and later
All Platforms

Goal

This document describes how to determine the remaining number of cleans left on a cleaning tape in an L-Series Library.

Solution

Use the following steps to determine number of cleans available:

Go to the LCD display of the library and go to the Diagnostics selection.
Select "Cleaning Tapes".

> The number displayed is the amount of cleanings left on each tape.

NOTE:
The Install Manual is not available to the customer.

For additional information, refer to the L700/L180 Tape Library Installation Manual, Chapter 5 "Configuring the Subsystem", Display Information.

Attachments

This solution has no attachment