Sun Netra 1280 Server
 
Sun Fire V1280 Server
 
Sun Fire E2900 Server
 

PLA-Support>Sun Systems>SPARC>Enterprise>SN-SPARC: SF-x8x0/Ex900
 
_Old GCS Categories>Sun Microsystems>Servers>Entry-Level Servers
 
_Old GCS Categories>Sun Microsystems>Servers>Midrange Servers
 
_Old GCS Categories>Sun Microsystems>Servers>Midrange V and Netra Servers
 

Applies to:

Goal

Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference
This is a quick reference for the syntax of LOM commands only.  These commands are executed at the lom prompt on the system controller, not in Solaris. For more information on each command please see the Sun Fire Entry-Level Midrange System Controller Command Reference Manual

Solution

Commands:

bootmode - Configure the way Solaris boots at the next reboot.

bootmode normal

bootmode [diag|skipdiag] [forth] [reset_nvram] bootmode -h

break - Send a break signal to the Solaris console.

break [-y|-n]

break -h

console - Connect to the Solaris/OpenBoot PROM console.

console

console -h

disablecomponent - Add a component to the blacklist.

disablecomponent[. . .]

disablecomponent -h

enablecomponent - Remove a component from the blacklist.

enablecomponent[. . .]

enablecomponent -h

flashupdate - Update the flash PROMs in the System Controller, all the system boards, or a specified board number.

flashupdate [-y|-n] -fall

flashupdate [-y|-n] -fsystemboards|scapp|rtos|...

flashupdate [-y|-n] -u

flashupdate [-y|-n] -c

flashupdate -h

help - Without arguments, list all available LOM commands. When an argument is supplied, display basic usage of the specified command and a short description.

help []

help []

help -h

history - Display the command history along with date and time stamps.

history

history -h

inventory - Display SEPROM contents of a FRU.

inventory

inventory []

inventory -h

logout - Log out from this connection.

logout

logout -h

password - Set the password for the LOM.

password

password -h

poweroff - Forcibly power off the whole system to standby, or a FRU, or a list of FRUs.

poweroff

poweroff [-y|-n]

poweroff [-y|-n][...]

poweroff -h

poweron - Power on the entire system, or a FRU, or a list of FRUs.

poweron

poweron [all|[...]]

poweron -h

reset Reset the Solaris system .

reset [-x|-a] [-y|-n]

reset -h

resetsc - Reset the System Controller.

resetsc [-y|-n]

resetsc -h

setalarm - Set the system alarm relays and associated LEDS.

setalarm 1|2 on|off

setalarm -h

setdate - Set the date and time for the system.

setdate [-v] [-t] []

setdate [-v] [-t][[]]][.]

setdate [-v] -r

setdate [-v] -t GMT<+|->

setdate -h

setescape - Set the sequence of characters used to switch from the Solaris or OpenBoot PROM console to the LOM prompt.

setescape

setescape -h

seteventreporting - The seteventreporting command controls which messages are printed at the LOM prompt and the level of logged messages sent to Solaris. 

seteventreporting on [0|1|2|3|4]

seteventreporting off [0|1|2|3|4]

seteventreporting default [0|1|2|3|4]

seteventreporting -h

setlocator - Set the state of the system Locator LED.

setlocator on|off

setlocator -h

setupnetwork - Set up System Controller network attributes.

setupnetwork

setupnetwork -h

setupsc - Configure optional System Controller features.

setupsc

setupsc -h

showalarm - Display state of system alarm relays and LEDs.

showalarm 1|2|system

showalarm -h

showboards - Display the status for all boards in the system

showboards [-ev] [-p] ...

showboards -h

showcomponent - Display a component or a list of components.

showcomponent [-v][. . . ]

showcomponent -h

showdate - Display the current date and time for the system.

showdate [-tv]

showdate -h

showenvironment - Display the current environmental status, temperatures, voltages, fan status, and so on, for the system..

showenvironment [-ltuvw] [-p] []

showenvironment [-ltuvw] []

showenvironment -h

showescape - Display the current escape sequence.

showescape

showescape -h

showeventreporting - Display the settings applied to the LOM software event reporting and messages.

showeventreporting

showeventreporting -h

showfault - Display the state of the system Fault LED.

showfault

showfault -h

showhostname - Display the system hostname.

showhostname

showhostname -h

showlocator - Display the state of the system Locator LED.

showlocator

showlocator -h

showlogs - Display the message event log.

showlogs

showlogs -h

For systems configured with enhanced-memory SCs (SC V2s), the following command shows the system error contents maintained in the persistent buffer.

showerrorbuffer -p

showlogs -p

showmodel - Display the platform model.

showmodel

showmodel -h

shownetwork - Display System Controller (LOM) network settings and MAC addresses.

shownetwork [-v]

shownetwork -h

showresetstate - Display the CPU registers after an abnormal Solaris reset. 

showresetstate [-w|-s|-v] [-f]

showresetstate -h

showsc - Display version and uptime information about the System Controller.

showsc [-v]

showsc -h

shutdown - Shut down Solaris and enter standby mode.

shutdown

shutdown -h

testboard - Test the specified CPU/Memory board.

testboard [-f]

testboard -h

Product
Sun Fire V1280 Server
Sun Fire E2900 Server
Netra 1280 Server
Netra 1290 Server

Keywords
lw8, commands, help, lom>, lom, showboards, showlogs, sc

This solution has no attachment