Replacing Disk in a Sun StorEdge(TM) A5x00 that is Shared by Nodes using Sun(TM) Cluster

Asset ID:	1-71-1012051.1
Update Date:	2017-02-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1012051.1 : Replacing Disk in a Sun StorEdge(TM) A5x00 that is Shared by Nodes using Sun(TM) Cluster

Applies to:

Sun Storage A5200 Array - Version All Versions and later
Sun Storage A5000 Array - Version All Versions and later
Sun Storage A5100 Array - Version All Versions and later
All Platforms

Goal

This article describes how to replace a disk in a Sun StorEdge[TM] A5x00 that is shared by nodes using Sun[TM] Cluster.

Solution

The best way to obtain information on replacing a disk in an A5X00 that is shared by nodes using Sun Cluster is to access documents via the Oracle Documentation site if you do not have hard copy documents.

        Key words for searching: scdidadm, "luxadm remove_device", "luxadm insert_device", devfsadm

        For Example Refer to : Sun Cluster 3.1 - 3.2 With Fibre Channel JBOD Storage Device Manual
                   Document Part No: 819-2994
                   Section: How to Replace a Disk Drive

For Sun Cluster 2.X

NOTE: If customer has OPS (Oracle(R) Parallel Server) as opposed to HA Oracle (High Availability Oracle) both SSVM/CVM and luxadm commands get run on both nodes, otherwise only luxadm commands are run on both nodes.

NOTE: When running commands that are run on both nodes each command should be run (and allowed to finish) on master/active node first node then the secondary/passive node.

Attachments

This solution has no attachment