Sun Fire[TM] servers: ScApp firmware logs periodic "I'm Alive" message

Asset ID:	1-71-1010861.1
Update Date:	2017-02-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1010861.1 : Sun Fire[TM] servers: ScApp firmware logs periodic "I'm Alive" message

Applies to:

Sun Fire 4810 Server - Version Not Applicable and later
Sun Fire 6800 Server - Version Not Applicable and later
Sun Fire 4800 Server - Version Not Applicable and later
Sun Netra 1280 Server - Version Not Applicable and later
Sun Fire V1280 Server - Version Not Applicable and later
All Platforms

Goal

ScApp firmware logs periodic "I'm Alive" message with FW 5.19.0 and above.

Fix

Description
ScApp firmware logs periodic "I'm Alive" message

A feature was integrated into the Sun Fire platforms ScApp firmware version 5.19.0 (patchID:114526-01), which will allow the System Controllers (SCs) to log an "I'm Alive" message to syslog

Steps to Follow

A feature was integrated into the Sun Fire platforms ScApp firmware version 5.19.0 (patchID:114526-01), which will allow the System Controllers (SCs) to log an "I'm Alive" message to syslog with a reporting interval of 4 hour.

This feature is enabled on both main / spare SCs and the messages observed will be similar to that reported in the following example :

main SC :

Aug 06 14:36:52 v4u-4800c-sc0 Platform.SC: Main, up 0 days 00:17:12, Memory 5,610,248
Aug 06 18:36:52 v4u-4800c-sc0 Platform.SC: Main, up 0 days 04:17:12, Memory 4,184,328
Aug 06 22:36:52 v4u-4800c-sc0 Platform.SC: Main, up 0 days 08:17:12, Memory 5,003,520
Aug 07 02:36:52 v4u-4800c-sc0 Platform.SC: Main, up 0 days 12:17:12, Memory 3,984,624
Aug 07 06:36:52 v4u-4800c-sc0 Platform.SC: Main, up 0 days 16:17:12, Memory 4,854,536

spare SC :
Aug 06 14:36:53 v4u-4800c-sc1 Platform.SC: Spare, up 0 days 00:08:12, Memory 1,872,440
Aug 06 18:36:53 v4u-4800c-sc1 Platform.SC: Spare, up 0 days 04:08:12, Memory 1,841,136
Aug 06 22:36:53 v4u-4800c-sc1 Platform.SC: Spare, up 0 days 08:08:12, Memory 1,886,840
Aug 07 02:36:52 v4u-4800c-sc1 Platform.SC: Spare, up 0 days 12:08:12, Memory 1,854,416
Aug 07 06:36:52 v4u-4800c-sc1 Platform.SC: Spare, up 0 days 16:08:12, Memory 1,844,488

The above ScApp platform log entries will be forwarded to any configured platform loghost service provider. 
For example, a platform that is configured to use the SYSLOG facility local0  on the loghost server will forward the following 
entries to the messages log file for each logged "I'm Alive" message cycle :

Aug 07 06:36:52 v4u-4800c-sc0 v4u-4800c-sc0 Platform.SC: [ID 667925 local0.notice] Main, up 0 days 16:17:12, Memory 4,854,536
Aug 07 06:36:52 v4u-4800c-sc1 v4u-4800c-sc1 Platform.SC: [ID 511668 local0.notice] Spare, up 0 days 16:08:12, Memory 1,844,488

The above feature was integrated into the ScApp 5.19.0 release as a means of logging a periodic message to syslog to report the SC's operating status. 
As observed from the above messages logged to the main / spare SCs' console , platform logs & any configured loghost service, the information included 
to the "I'm Alive" logged messages will include -- SC uptime, memory in-use (SC's Total Memory - Free Memory) , and main/spare state. At this point,
the 4 hour reporting interval is deemed to be suitable for most configuration environments and is not a configurable value via ScApp shell's commands.

On a Sunfire/Netra 1280/2900, these messages can be turned off via the "seteventreporting off" command at the lom prompt.

Product
Sun Fire E6900 Server
Sun Fire 3800 Server
Sun Fire 4800 Server
Sun Fire 4810 Server
Sun Fire 6800 Server
Netra 1280 Server
Sun Fire V1280 Server
Sun Fire E4900 Server
Sun Fire E2900 Server

Internal Comments
For internal Sun use only.

see Bug ID 4784278 -- " SC should log a "alive" message to syslog periodically"

Attachments

This solution has no attachment