Qlogic Switch:Set Up Network for Qlogic Switch

Asset ID:	1-71-1007642.1
Update Date:	2014-02-13
Keywords:

Solution Type Technical Instruction Sure

Solution 1007642.1 : Qlogic Switch:Set Up Network for Qlogic Switch

Applies to:

Qlogic SANbox 9100 Switch - Version Not Applicable and later
All Platforms

Goal

How to initially set up network for Qlogic Switch.

Solution

Steps to Follow
Set Up Network for Qlogic Switch:

1) Install the serial cable (null modem cable) from a host to Qlogic
switch.
2) vi /etc/remote
add the following line....
hardwire:\
:dv=/dev/term/b:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
3) Tip hardwire to Qlogic switch.
root@sca-sea-420a # tip hardwire
connected
Sanbox2 login: admin
Password: password
Establishing connection...   Please wait.
*****************************************************
*                                                   *
*       Command Line Interface Shell  (CLISH)       *
*                                                   *
*****************************************************
SystemDescription  Sun SANbox2-16
Eth0NetworkAddress 192.168.3.18 (use 'set setup system' to update)
MACAddress         00:c0:dd:00:c1:d3
WorldWideName      10:00:00:c0:dd:00:c1:d2
SymbolicName       SW2G
SWImageVersion     V1.5.0.7-0
SWImageBuiltDate   Wed Mar  5 18:25:22 2003
DiagnosticsStatus  Passed
SecurityEnabled    False
Alarms history ...
------------------
[1][Wed Mar 31 17:05:45.537 2004][A4101][Switch
Management:0xdd00c1d3.361.4][Warning - development logging is enabled]
SW2G #> admin start
SW2G (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Eth0NetworkAddress       (dot-notated IP Address)
[192.168.3.18 ]  129.145.56.184
Eth0NetworkMask          (dot-notated IP Address)
[255.255.255.0]  255.255.254.0
Eth0GatewayAddress       (dot-notated IP Address)
[192.168.3.1  ]  129.145.56.254
Eth0NetworkDiscovery     (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp)
[Static       ]  4
AdminTimeout             (dec value 0-1440 minutes, 0=never)
[30           ]
TempMonitoringWarning    (dec value 0-100 degrees Celsius)
[65           ]
TempMonitoringFailure    (dec value 0-100 degrees Celsius)
[70           ]
TempFailurePortShutdown  (True / False)
[False        ]
SecurityEnabled          (True / False)
[False        ]
LocalLogEnabled          (True / False)
[True         ]
RemoteLogEnabled         (True / False)
[True         ]
RemoteLogHostAddress     (dot-notated IP Address)
[0.0.0.0      ]
Do you want to save and activate this system setup? (y/n): [n] y
System setup saved and activated.
SW2G (admin) #>
Alarm Msg: [2][Mon Apr 05 16:00:43.861 2004][A4101][Switch
Management:0xdd00c1d3.361.4][Network setup is changing - may lose
connection to switch]
SW2G (admin) #> quit
Good bye.
Sanbox2 login:
4) Now try to ping the Qlogic switch from the host.
root@sca-sea-420a # ping 129.145.56.184
129.145.56.184 is alive
5) Ping worked.  Now try to telnet into the switches.
root@sca-sea-420a # telnet 129.145.56.184
Trying 129.145.56.184...
Connected to 129.145.56.184.
Escape character is '^]'.
Linux 2.4.18-xfs (Sanbox2) (16:02 on Monday, 05 April 2004)
Sanbox2 login:
Note: The IP address of the switch shipped from manufacturing is set to the
default value of 10.0.0.1. This default value can also be changed using
RARP,TFTP or SANsurfer/SANBoxManager GUI.

Product
Sun StorageTek 2 Gb 8-Port Switch

@ Qlogic, Switch, network
@ Previously Published As
@ 75305

@ Change History
@ Date: 2004-04-12
@ User Name: 13128
@ Action: Approved
@ Comment: KE quality checklist applied
@ Version: 0
@ Date: 2004-04-09
@ User Name: 13128
@ Action: Accepted
@ Comment:
@ Version: 0

Attachments

This solution has no attachment