Sun Fire[TM] 3800-6800/12K-E25K servers: Capacity on Demand (COD) How to activate CPU's into a domain?

Asset ID:	1-71-1005403.1
Update Date:	2017-02-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1005403.1 : Sun Fire[TM] 3800-6800/12K-E25K servers: Capacity on Demand (COD) How to activate CPU's into a domain?

Related Items


Sun Fire E25K Server
 Sun Fire 4810 Server
 Sun Fire 3800 Server
 Sun Fire 15K Server
 Sun Fire 12K Server
 Sun Fire 6800 Server
 Sun Fire E6900 Server
 Sun Fire E2900 Server
 Sun Fire E20K Server
 Sun Fire V1280 Server
 Sun Fire 4800 Server
 Sun Fire E4900 Server

Related Categories


PLA-Support>Sun Systems>SPARC>Enterprise>SN-SPARC: SF-x8x0/Ex900
 _Old GCS Categories>Sun Microsystems>Servers>Midrange V and Netra Servers
 _Old GCS Categories>Sun Microsystems>Servers>High-End Servers
 _Old GCS Categories>Sun Microsystems>Servers>Midrange Servers

PreviouslyPublishedAs
207524

Applies to:

Sun Fire V1280 Server - Version Not Applicable and later
Sun Fire 3800 Server - Version Not Applicable and later
Sun Fire 4800 Server - Version Not Applicable and later
Sun Fire 4810 Server - Version Not Applicable and later
Sun Fire 15K Server - Version Not Applicable and later
All Platforms

Goal

After the licenses are ordered, delivered and entered into the Systems Controller configuration how do I bring the newly licensed CPU's into the domain configuration?

Fix

POST or HPOST evaluates the state of the licenses on the particular platform when it runs.
stage_cpu_lpost(): No NMB Boards in config. Skipping Stage nmb_cpu_lpost.

Acquiring licenses for all good processors...
Proc SB17/P3 deconfigured: no license available.
Proc SB17/P1 deconfigured: no license available.

Therefore in order to activate COD licenses into a domain POST needs to run. So we have the following options:

Keyswitch the domain domain off (or standby) and on to make post evaluate the license situation again
DR a Uniboard (SB) out the domain and back in

From the Systems controller:

SC> addcodlicense verylonglicensestringhere
SC> deleteboard SB1
SC> addboard SB1

From the domain:

SC> addcodlicense verylonglicensestringhere
DOMAIN> cfgadm -c disconnect SB1
DOAMIN> cfgadm -c configure SB1

On single board domains only option 1 can be used.

Product
Sun Fire V1280 Server
Sun Fire E6900 Server
Sun Fire E4900 Server
Sun Fire E2900 Server
Sun Fire 6800 Server
Sun Fire 4810 Server
Sun Fire 4800 Server
Sun Fire 3800 Server
Sun Fire E25K Server
Sun Fire E20K Server
Sun Fire 15K Server
Sun Fire 12K Server

Keywords: COD, cpu, license, DR, activate, enable

Internal Section

Previously Published As 90205

Attachments

This solution has no attachment