![]() | Oracle System Handbook - ISO 7.0 May 2018 Internal/Partner Edition | ||
|
|
![]() |
|||||||||||||||||||||||||
Solution Type Technical Instruction Sure Solution 1004609.1 : Sun Storage Array D130: How to read panel LED's
PreviouslyPublishedAs 206392 Applies to:Sun Netra st D130 Storage Array (DC) - Version Not Applicable and laterSun Netra st D130 Storage Array (AC) - Version Not Applicable and later All Platforms GoalThis document is intended to examine and explain all the LED's and switch setting on a Sun Storage D130 Array. It will also touch on daisy chaining and termination. The information provided here has been extracted from Netra™ st D130 Installation and Maintenance Manual SolutionThe front panel of the D130 has 6 LED's arranged in the below configuration: The System Power LED is lit when power is on and unlit when power is off. The system summary fault LED is green when all is normal and amber when the entire D130 (minus the disk drives) needs to be replaced.
In order to explain the Disk Drive LED's the rear panel needs to be referenced: The SCSI ID switch sets the SCSI IDs for the disk drives. Back Panel LEDs System Power and System Summary Fault LEDs Auto Termination Indication LEDs
Attachments This solution has no attachment |
|||||||||||||||||||||||||
|