Oracle ZFS Storage Appliance: How to resolve FMA event SPX86A-8003-DG

Asset ID:	1-79-2310030.1
Update Date:	2017-09-22
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2310030.1 : Oracle ZFS Storage Appliance: How to resolve FMA event SPX86A-8003-DG

Related Items


Sun ZFS Storage 7420
 Oracle ZFS Storage ZS5-2
 Sun Storage 7110 Unified Storage System
 Oracle ZFS Storage ZS3-2
 Sun Storage 7210 Unified Storage System
 Oracle ZFS Storage ZS4-4
 Oracle ZFS Storage Appliance Racked System ZS5-4
 Sun Storage 7410 Unified Storage System
 Oracle ZFS Storage ZS5-4
 Oracle ZFS Storage Appliance Racked System ZS5-2
 Sun Storage 7310 Unified Storage System
 Oracle ZFS Storage ZS3-4
 Sun ZFS Storage 7120
 Sun ZFS Storage 7320
 Oracle ZFS Storage Appliance Racked System ZS4-4
 Oracle ZFS Storage ZS3-BA

Related Categories


PLA-Support>Sun Systems>DISK>ZFS Storage>SN-DK: 7xxx NAS

In this Document

Purpose

Details

Applies to:

Sun ZFS Storage 7120 - Version All Versions and later
Oracle ZFS Storage ZS5-4 - Version All Versions and later
Oracle ZFS Storage ZS5-2 - Version All Versions and later
Oracle ZFS Storage Appliance Racked System ZS5-4 - Version All Versions and later
Oracle ZFS Storage Appliance Racked System ZS5-2 - Version All Versions and later
7000 Appliance OS (Fishworks)

Purpose

The purpose of this document is to explain alert SPX86A-8003-DG for the Oracle ZFS Storage Appliances.

Please Note: The information in this document is also applicable to ZFS-SA systems deployed within Engineered Systems (Exalogic, Exadata, SuperCluster etc.)

Details

Symptom: The power is configured for AC Low-Line power into the ZFS when it should be configured for AC High Power (240VAC).

Resolution:

1. Check that power is properly configured for High AC Power (240 VAC).

2. Verify site power and that the rack is receiving proper input power.

3. If the problem is identified and corrected, please clear the event and monitor.

In the BUI: Maintenance -> Problems -> Click on Problem -> Click MARK REPAIRED

In the CLI: maintenance problems select <problem-id> markrepaired

mark repair

Engaging a Support Engineer: Please update your SR if the proposed solution did not fix the issue and a support engineer will then be assigned to assist.

Attachments

This solution has no attachment