| Asset ID: |
1-79-2243874.1 |
| Update Date: | 2017-05-23 |
| Keywords: | |
Solution Type
Predictive Self-Healing Sure
Solution
2243874.1
:
M12-config.xbbox - A fault occurred during powerup
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
|
In this Document
Applies to:
Fujitsu SPARC M12-2S
SPARC
Purpose
Provide additional information for message ID: M12-config.xbbox
Fujitsu fault code:
018AF0E0, 018AF0E1, 018AF0E2
Details
Type
- Hardware Fault
- config.xbbox
Severity
- Major
Description
-
A failure occurred during powerup (at connecting power to a xb-box) because the XB board(s) in the XB-box was/were not detected.
Automated Response
- No action is taken; the powerup proceeds normally without failed XB board(s).
Impact
- The failed XB board is deconfigured.
Indicted Hardware
- The XB board is the suspect. There is a chance that the XB board is not inserted firmly.
Suggested Action for System Administrator
- To recover from this issue remove the AC power from the system for 30 seconds then re-apply power.
- Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)
Attachments
This solution has no attachment
