M12-device.misconfig_xbucable - An Invalid XBU Cable has been Detected

Asset ID:	1-79-2243522.1
Update Date:	2017-05-17
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2243522.1 : M12-device.misconfig_xbucable - An Invalid XBU Cable has been Detected

Applies to:

Fujitsu SPARC M12-2 - Version All Versions and later
Fujitsu SPARC M12-2S - Version All Versions and later
SPARC

Purpose

Provide additional information for message ID: M12-device.misconfig_xbucable

Fujitsu fault code:

018AF110, 018AF111, 018AF112

Details

Type

: Hardware Fault; device.misconfig_xbucable

Severity

: Major

Description

: A fault occurred where an incorrect XBU Cable was detected in a box. It is possible that unsupported (unknown) XBU Cable is installed.

Automated Response

: The power-on request for the box is rejected.

Impact

: The system is deconfigured

Indicted Hardware

The XBU Cable is marked for replacement.

The improper XBU Cable should be removed from the server.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time. Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

Attachments

This solution has no attachment