M12-device.misconfig_xbux - An Invalid Xbux has been Detected

Asset ID:	1-79-2243499.1
Update Date:	2017-05-17
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2243499.1 : M12-device.misconfig_xbux - An Invalid Xbux has been Detected

Applies to:

Fujitsu SPARC M12-2S - Version All Versions and later
Fujitsu SPARC M12-2 - Version All Versions and later
SPARC

Purpose

Provide additional information for message ID: M12-device.misconfig_xbux

Fujitsu fault code:

018AF105

Details

Type

: Hardware Fault; device.misconfig_xbux

Severity

: Major

Description

: A fault occurred where an incorrect XBUX was detected in a box. It is possible that unsupported (unknown) XBUX isinstalled.

Automated Response

: The power-on request for the box is rejected.

Impact

: The system is deconfigured

Indicted Hardware

The XBUX is marked for replacement.

The improper XBUX should be removed from the server.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time. Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

Attachments

This solution has no attachment