M12-device.misconfig_psubp - An Invalid Psubp has been Detected

Asset ID:	1-79-2243498.1
Update Date:	2017-08-14
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2243498.1 : M12-device.misconfig_psubp - An Invalid Psubp has been Detected

Applies to:

Fujitsu SPARC M12-2 - Version All Versions and later
Fujitsu SPARC M12-2S - Version All Versions and later
Fujitsu SPARC M12-1
SPARC

Purpose

Provide additional information for message ID: M12-device.misconfig_psubp

Fujitsu fault code:

018AF104

Details

Type

: Hardware Fault; device.misconfig_psubp

Severity

: Major

Description

: A fault occurred where an incorrect PSUBP was detected in a box. It is possible that unsupported (unknown) PSUBP isinstalled.

Automated Response

: The power-on request for the box is rejected.

Impact

: The system is deconfigured

Indicted Hardware

The PSUBP is marked for replacement.

The improper PSUBP should be removed from the server.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time. Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

Attachments

This solution has no attachment