Fujitsu SPARC M12-1
 
Fujitsu SPARC M12-2
 
Fujitsu SPARC M12-2S
 
Fujitsu M10 PCI Expansion Unit
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M12-device.fan.tooslow_pcibox

Fujitsu fault codes:

1100002E, 1100002F

Details

Type

Hardware Fault

   device.fan.tooslow_pcibox

Severity

Major

Description

Fault due to the rotation speed of a PCI Expansion Box fan (including fans in fan trays or in PSUs) being either lower than its predefined threshold or a fan is stopped completely.

Automated Response

When a fan in a PSU in PCI expansion box is failed, then this PSU will be stopped.

Impact

For a PCI expansion box, if the failure is due to the fan in a PSU, then the PSU is deconfigured.

In all other cases, nothing is deconfigured.

Indicted Hardware

The fan, fan tray, or PSU is marked for replacement.

Once the full complement of fans has been restored (this includes the replacement of PSUs with faulty fans) for the box (and once the temperature for all temperature sensors is in normal range) the speed of all the fans is returned to normal speed.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

This solution has no attachment