Fujitsu SPARC M12-1
 
Fujitsu M10 PCI Expansion Unit
 
Fujitsu SPARC M12-2
 
Fujitsu SPARC M12-2S
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M12-i2c.device.seeprom-corrupt_pcibox

Fujitsu fault codes:

11000026, 11000058, 11000059, 1100005A

Details

Type

Hardware Fault

   i2c.device.seeprom-corrupt_pcibox

Severity

Major

Description

PCI expansion box firmware found invalid data checksums written to SEEPROM on a FRU as firmware probes the FRU during startup of the PCI expansion box.

This fault is detected on a link board, IOB, FANBP, or PSU in a PCI expansion box.

Automated Response

No immediate action is taken.

Impact

The FRU is deconfigured.

Indicted Hardware

The FRU, where this faulty SEEPROM is mounted, is marked for replacement

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

This solution has no attachment