Fujitsu SPARC M12-1
 
Fujitsu SPARC M12-2
 
Fujitsu SPARC M12-2S
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M12-upset_domain.panic

Fujitsu fault codes:

01B90006, 01BA0006

Details

Type

Software  

  upset_domain.panic

Severity

Major

Description

Upset due to a Solaris panic. The reason for the panic is unknown to XSCF software. The domain panic could be due to either a hardware or software problem.

Automated Response

The domain will attempt to save the error telemetry and then perform diagnosis on system reboot.

In the event the system is unable to save the error telemetry or produce an automated diagnosis,
then the information from the system console may be useful in attempting to manually diagnose the domain panic.

Impact

Nothing will be deconfigured.

Indicted Hardware

No FRU will be specified for replacement. The PPAR ID will be displayed within the logged message.

Suggested Action for System Administrator

The system administrator should examine output displayed to the XSCF console, domain's console, domain logs files (/var/adm/messages, fmdump -v) and the output from the following XSCF commands (showstatus, showhardconf, showlogs error ) to gain a further understanding of the problem.

If there is no explanation why the domain panic'ed, then proceed with the steps outlined below.

1. Collect diagnostics data:
   • In most cases a snapshot from the main XSCFU will be required to quickly and accurately identify the issue.  See Document 1540225.1 - Data Collection for Fujitsu M10 Servers
   • In the event of a software panic and some hardware panics a domain explorer will also be needed.
   • Corefiles generated from the panic should be saved and may need to be uploaded ( See Document 1020199.1 ).
2. Gather the snapshot and explorer data bundles and contact your Authorized Service Provider.
   • See Document 1010911.1 - What Should I Send to Oracle After a Solaris Panic or Unexpected Reboot?

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

References

This solution has no attachment