| Asset ID: |
1-79-2218808.1 |
| Update Date: | 2017-10-16 |
| Keywords: | |
Solution Type
Predictive Self-Healing Sure
Solution
2218808.1
:
M12-upset_config.fan - The number of fans are insufficient to permit powerup
| Related Items |
- Fujitsu SPARC M12-1
- Fujitsu SPARC M12-2
- Fujitsu SPARC M12-2S
|
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
|
In this Document
Applies to:
Fujitsu SPARC M12-2
Fujitsu SPARC M12-2S
Fujitsu SPARC M12-1
SPARC
Purpose
Provide additional information for message ID: M12-upset_config.fan
Fujitsu fault codes:
018AF030, 018AF031, 018AF0F1
Details
Type
- Hardware Fault
- upset_config.fan
Severity
- Major
Description
-
An upset occurred during powerup (either at connecting power cords to the system or initial powerup of PPARs) where the number of fans are insufficient.
Automated Response
- For M12-1 or M12-2 systems, the platform will not be powered up.
For M12-2S systems, the building block will not be powered up.
Impact
- Nothing is deconfigured.
Indicted Hardware
- The fan is specified as a suspect.
Suggested Action for System Administrator
- The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.
Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)
Attachments
This solution has no attachment
