Fujitsu SPARC M12-1
 
Fujitsu SPARC M12-2
 
Fujitsu SPARC M12-2S
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M12-if.fe-cpu-mbc

Fujitsu fault codes:

01920469, 15070000, 15070001, 15070002, 15022000, 15022201,
15022202, 15022003, 15022004, 15022005

Details

Type

Hardware Fault

   if.fe-cpu-mbc

Severity

Major

Description

Fault due to a fatal error on the interface between a CPU chip and MBC chip.

Automated Response

PPAR using this CPU chip is reset.

Impact

For M12-1 or M12-2 systems, the platform is deconfigured.

For M12-2S systems, the building block is deconfigured

Indicted Hardware

For M12-1 systems, MBU is marked for replacement.

For M12-2/M12-2S systems, CMUL is marked for replacement.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

This solution has no attachment