FMM-8000-43 - Invalid Frame configuration image

Asset ID:	1-79-2078645.1
Update Date:	2017-01-19
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2078645.1 : FMM-8000-43 - Invalid Frame configuration image

Applies to:

Netra Modular System
Information in this document applies to any platform.

Purpose

Provide additional information for message ID: FMM-8000-43

Details

Invalid Frame configuration image

Type

Fault

fault.frame.invalid-configuration-img

Severity

Major

Description

The frame monitoring module has discovered that the configuration image could not be validated.

Frame configuration image holds all the frame configuration data. Invalid configuration image would leave the frame in dysfunctional state

Configuration image in the compute node doesn't match the configuration in the frame monitoring module (FMM).

This problem can occur when the frame backplane node configuration image is invalid (e.g. fails checksum )
or the frame monitoring module configuration image is corrupt.

If the frame monitoring module configuration image is invalid,
Use escalation mode to overwrite the configuration image on the frame management module (FMM).
If the problem persists, then replace the frame backplane node (FBN).

If the frame monitoring module configuration image is corrupt,
use escalation mode to overwrite the configuration image on the frame management module (FMM).
If the problem persists, then replace the FMM.

Automated Response

Frame level service-required LED is illuminated.

Impact

Frame is in a dysfunctional and unusable state.

Suggested Action for System Administrator

Contact Oracle support services.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

Attachments

This solution has no attachment