ETHSWITCH-8000-C2 - SEFOS process failure.

Asset ID:	1-79-2077331.1
Update Date:	2018-03-01
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2077331.1 : ETHSWITCH-8000-C2 - SEFOS process failure.

Applies to:

Oracle Switch ES1-24
Information in this document applies to any platform.

Purpose

Provide additional information for message ID: ETHSWITCH-8000-C2

Scope

Details

SEFOS process failure.

Type

Fault

Severity

Critical

Description

The SEFOS process has crashed repeatedly and has been disabled.

Manually restart the /SYS/sefos target. SEFOS will restart with a default configuration. You should apply and save any custom configuration again. Note that the old configuration file is still available and can be recovered; it is stored as switch.conf.crash. Since the file most likely caused the repeated crashes you should proceed with extreme caution if you attempt to recover it.

Automated Response

Switch operation is shut down.

Impact

Switch management is disabled, and the switch will not forward traffic.

Suggested Action for System Administrator

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

Attachments

This solution has no attachment