SPARC T7-4
 
Oracle SuperCluster M7 Hardware
 
SPARC T7-2
 
SPARC M7-16
 
SPARC T7-1
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

 Additional Information for Message ID: SPT-8002-4D

Details

 Type

Hardware Fault 

fault.chassis.voltage.failing-nc

 

Severity

Critical

Description

           A voltage reading on a board has been measured outside the threshold for a second time.

Automated Response

          The system will be powered cycled.

Impact

          The system will be powered cycled. No service is required.

Suggested Action for System Administrator

Event lists and/or ereports for both the temperature and voltage thresholds will not report or take any action on the upper or lower non-critical temperature thresholds, as the system will not have a chance to poll when this alarm is asserted.

By default, it takes approximately 5 seconds for sensor polling.  In order to poll 3 readings: upper non-critical, upper critical and upper non-recoverable thresholds, it would take more than 30 seconds.

Please refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

References

This solution has no attachment