Asset ID:	1-79-2001325.1
Update Date:	2017-12-05
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 2001325.1 : Netra Server X5-2 Product Page

Applies to:

Netra Server X5-2 - Version All Versions and later
Information in this document applies to any platform.

Purpose

This document contains the Netra Server X5-2 Product Page.

Details

Documentation Overview Patches/Firmware Product Issues Training Knowledge Troubleshooting SSH X86 Home

Netra Server X5-2

Overview:

The Oracle Netra X5-2 is a carrier-grade rackmount (2RU) dual-socket server. This server supports two Intel® Xeon® processor E5-2600 v3 product family CPUs, providing up to 36 total cores in a compact, energy-efficient 2U footprint. Utilizes Oracle's unique NVM Express (NVMe) design, providing up to 6.4TB of hot-swappable flash. Built-in, proactive fault detection, advanced diagnostics, and firmware optimized for Oracle software deliver extreme reliability. Full NEBS Level 3 Compliance

face_6-slot face_8-slot

Oracle Netra Server X5-2 was RR 06/02/2015.

PTS Engagement:

Support Alias: support_nx5-2_hw_ww_grp@oracle.com
Forum: BROWSE : http://myforums.oracle.com/jive3/forum.jspa?forumID=6060
Instant Messages: x64-all (beehive chat room)

Facts:

Processors

Up to two Intel Xeon processors E5-2600 v3 Series (Haswell-EP) CPU's
- E5-2699 v3 @ 2.3Ghz Intel, 18-core, 45MB L3 cache, 145W
2 Integrated DDR4 Memory Controllers per processor with 4x channels per processor, up to 3x DIMMs per channel,
Haswell-EP CPUs also incorporate Integrated Voltage Regulators (IVR)
Intel Quick-Path Interconnect (QPI) architecture for inter-CPU communication 9.6Gt/sec, Digital Media Interface (DMI) chip-to-chip connection to the Wellsburg PCH.
DMI is a high-speed interface which integrates advanced priority-based servicing allowing for concurrent traffic and true isochronous transfer capabilities.
8, 10, 12, or 18 Core CPUs with Turbo Boost mode and Hyper-Threading Chipset
dual-threaded Haswell cores

Memory

Up to 12x DIMMs per processor for a maximum of 24x DDR4 2133Mhz RDIMM/LRDIMMs, a maximum of 768GB of memory in dual-processor systems.
A maximum of 12x DIMMs for a maximum of 384GB in single-processor systems.
Each CPU controller has 2 Integrated Memory Controllers (IMC) with 2 Home Agent (HA) data buffers
Each Home Agent (HA) buffer has 2 DDR4 DIMM channels, supporting 3 DIMMs per channel with speeds up to 2133MT/s.
DRAM speeds of 1333, 1600, 1867,and 2133 depnding upon configuration and memory type.
16 or 32GB DIMM size capacity

Disks & Storage

NX5-2 comes in two storage configurations
The disk connectors in disk bays 0, 1, 2, and 3 are dual technology connectors. When a SAS device is plugged in, the SAS portion of the connector will drive the SAS device. If that SAS device is removed and replaced with a NVMe device, the NVMe switch card will now drive the NVMe SSD. If a customer orders the NVMe solution, both the SAS and NVMe cables will be installed to the disk backplane. At this time, NVMe is not a bootable solution.
- 6 disk config:
  - 6x 2.5" 600GB SAS3, or 1.2GB SAS3 HDD hot-swappable with RAID enabled
  - 6x 2.5" 400GB SSD SAS3 drives hot-swappable with RAID enabled
  - 4x drives can optionally be NVMe PCIe 3.0 SSD 1.6TB drives (slots 0, 1, 2, and 3 only - NOT BOOTABLE), through SAS3 switch card only
  - Optional DVD
- 8 disk config:
  - 8x 2.5" 600GB SAS3, or 1.2GB SAS3 HDD hot-swappable with RAID enabled
  - 8x 2.5" 400GB SSD SAS3 Drives hot-swappable with RAID enables
  - 4x drives can optionally be NVMe PCIe 3.0 SSD 1.6TB drives (slots 0, 1, 2, and 3 only - NOT BOOTABLE), through SAS3 switch card only
RAID card has 128MB of write cache, SuperCap backup, Aspen LSI based
- Part Number 7085209
- The card will be installed in PCIe slot 6 at the factory and cabled to the disk back plane.
- The cables to the on-board LSI3008 will not be installed.
NVMe Disks notes
- 8-port 12Gbps SAS PCI Express Switch HBA to support NVMe drives, in PCI slot 5 only
- NVMe Disks are not bootable
- Part Number7096186
- If four NVMe disks are installed, SAS disk in slot 4 will be the first bootable disk.
Flash Accelerator F160 NVMe Card, 1.6 TB eMLC (AURA 3.0)
External Storage Options Here (link pending)

Graphics

Pilot3 VGA 1280x1024 60HZ 8MB Video memory built-in
Rear video port DB-15 connector

Networking

4x on-board 10/100/1000/10000GBaseT Ethernet (RJ45 Connector) from Intel Fortville PCIe-3 chipset
The name of the driver in all OS's is 'i40e'

PCI and Internal I/O

I/O bridge is Wellsburg PCH chip architecture, which includes the USB host controllers, and SATA interconnect (for the DVD).
- 2x PCIe Gen3 slots x16
- 4x PCIe Gen3 slots x8 (slot 6: internal HBA slot) (slot 5: NVMe controller slot)
- 2x USB 2.0 internal ports, one with OSA stick (bottom)
On-Board LSI 3008 SAS3 HBA Disk Controller Note: does not support IR(Integrated RAID) or RAID 0/1, only supports IT (Initiator/Target) mode.

External I/O

2x USB 2.0 Rear chassis ports (Capable of USB 3.0 but not supported)
2x USB 2.0 Front chassis ports
4x rear 10GbE ports (RJ45 connectors)
Supported PCIe

Service Processor

Emulex Pilot3 (on motherboard) Service Processor
ILOM 3.2.x with standard BMC/IPMI/Lan/SNMP interfaces
Out-of-band Management 10/100/1000BaseT Ethernet (RJ45 Connector) through netmgmt port
Serial Management (RJ45 Connector)
Remote KVMS over IP
8MB video memory
1280x1024 max resolution

Power Supplies & Cooling

2x 1200W Hot-swap Redundant PSU's AC or DC options (1+1)
5x Hot-swap Redundant Dual Fans

Software

Click N X5-2 for the latest official list (Correct link pending)
Oracle Solaris 11.2 (SRU9)
Oracle VM Server 3.3.3 (MOS Note)
Oracle Linux 6.6 64-bit

Racks

Supported in Sun Rack II (redwood) 1242.
Supported in any racks meeting the below criteria:
Four-post rack (mounting at both front and rear), Not supported in two-post racks.
Rack should have a horizontal opening and unit vertical pitch conforming to ANSI/EIA 310-D-1992 or IEC 60927 standards. Only M6 tapped or 9.5mm square holes are supported.
Distance between front and rear mounting planes minimum 61 mm and maximum 91.5cm (24 inches to 36 inches).
Minimum clearance depth (to front cabinet door) in front of front rack mounting plane: 1 inch (2.54cm).
Minimum clearance depth (to rear cabinet door) behind front rack mounting plane: 90cm (35.43 inches) with the cable management arm, or 80cm (31.5 inches) without the cable management arm.
Minimum clearance width (between structural supports and cable troughs) between front and rear mounting planes: 45.6cm (18 inches).
Minimum clearance for service access, clearance, front or server: 123.2cm (48.5 inches).
Minimum clearance for service access, clearance, rear of server: 91.4cm (36 inches).

Links

Attachments

This solution has no attachment