SPARC T8-1
 
SPARC T8-4
 
SPARC M7-8
 
SPARC T7-4
 
Oracle SuperCluster M7 Hardware
 
SPARC M8-8
 
SPARC T8-2
 
SPARC T7-2
 
Oracle SuperCluster M8 Hardware
 
SPARC M7-16
 
SPARC T7-1
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

 Additional Information for Message ID SPT-8001-Q5

Details

 TYPE: Temperature Fault

         fault.chassis.temp.over.critical

Severity: Major

Description

A component temperature sensor has exceeded the High Temperature Hard Shutdown Threshold.

Automated Response
The platform or the affected DCU will shutdown in a non-graceful fashion.

Impact
The platform or affected DCU will remain shutdown until the fault condition is cleared.  The fault must be manually cleared.

Suggested Action for System Administrator
The administrator should attempt to  remedy the situation causing the condition. Causes could be external air, inlet blockages, room hot spots etc are possible causes.

If the system is connected via the Automated Service Request [ASR] interface, a service request should be automatically generated.  However if necessary  Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

This solution has no attachment