SPARC M7-8
 
Oracle SuperCluster M7 Hardware
 
SPARC T7-4
 
SPARC M8-8
 
SPARC T7-2
 
Oracle SuperCluster M8 Hardware
 
SPARC M7-16
 
SPARC T7-1
 
Sun SPARCserver
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

 Provide additional information for message ID: ILOM-8000-6N

Details

ILOM Unable to Boot

Type

Fault
  defect.ilom.boot.preferred-invalid

Severity

Major

Description

Message ID: ILOM-8000-6N indicates that the ILOM fault manager has applied diagnosis
to error reports indicating the preferred ILOM firmware image could not be booted.

The service procesor stores two separate ILOM images.

One of the ILOM images is designated as the preferred image.
If the preferred image is not used due to checksum or boot errors, then the non-preferred image is used.

This fault will be automatically cleared when ILOM is booted using the preferred image.

Automated Response

The server has booted from the ILOM backup image.
The chassis wide service-required LED's will be illuminated.

Impact

The ILOM backup image is likely to be an older and possibly out of date image.

Suggested Action for System Administrator

The user must reload the ILOM image.

Refer to the following document for the latest procedures for displaying event content in preparation

for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

This solution has no attachment