SPARC M5-32 and M6-32 Servers Customer Actions: FRU configured out of Solaris

Asset ID:	1-79-1632517.1
Update Date:	2014-08-06
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1632517.1 : SPARC M5-32 and M6-32 Servers Customer Actions: FRU configured out of Solaris

Applies to:

SPARC M6-32 - Version All Versions and later
SPARC M5-32 - Version All Versions and later
Information in this document applies to any platform.

Purpose

******************************************************************************
To report errors or request improvements on this document,
please go to http://support.oracle.com and put a comment on Doc ID: 1632517.1
******************************************************************************

This document provides the actions to be done by the Customer before and after the Field Engineer service action.

Details

TSC engineers: please copy/paste the following text into a public note of the Service Request

------------------------------------------------------ CUT HERE ---------------------------------------------------------------

Dear Customer,

Below you will find the actions you must take prior to and following the Oracle Field Engineer service action. Completing these actions will help to assure a fast and successful resolution.

A link to relevant knowledge is provided to help you complete the required steps. The documentation is intended to provide general guidance on the types of actions required, but may not include all the necessary steps for your specific environment.

Note – A data backup is not a prerequisite, but is a wise precaution.

Prior to Field Engineer service action:

Unconfigure the FRU (e.g., HDD) from Solaris. The ‘cfgadm’ command may be used.

Following the Field Engineer service action:

Reconfigure the FRU into Solaris.

For more information see the sections labeled ‘Locate an HDD’, ‘Removing an HDD’, and ‘Install an HDD’
in the SPARC M5-32 and SPARC M6-32 Servers Service Manual located at http://docs.oracle.com/cd/E24355_01/index.html
for examples of how ‘cfgadm’ may be used to unconfigure and reconfigure the FRU from Solaris.

------------------------------------------------------ CUT HERE ---------------------------------------------------------------

Attachments

This solution has no attachment