Fujitsu M10-1/M10-4/M10-4S Servers: DraftSR: M10-upset_config

Asset ID:	1-79-1571499.1
Update Date:	2013-10-30
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1571499.1 : Fujitsu M10-1/M10-4/M10-4S Servers: DraftSR: M10-upset_config_xbu

Applies to:

Fujitsu M10-4S - Version All Versions and later
Information in this document applies to any platform.

Purpose

This article describes activities required by a System Administrator to promote a DraftSR to a formal Service Request when an XSCF reports a M10-upset_config_xbu

Scope

This document is intended for System Administrators and support personnel.

Details

Auto Service Request (ASR) provides automatic failure detection and SR creation for Oracle SPARC systems. See http://www.oracle.com/us/asr/index.html for more information on ASR. This particular ASR event has created a Draft Service Request (DraftSR). DraftSRs require manual verification in order to determine whether further action by Oracle Service is required.

Description of the ASR Event: A fault occurred during powerup.

Step 1: Please review and follow the steps recommended in document: 1594296.1 - M10-upset_config_xbu - A fault occurred during powerup

Step 2: If the error's root cause does not need to be investigated by Oracle, no further action is required. The DraftSR will automatically expire 30 days from the sending of the notification. If the failure has been verified as requiring an investigation by Oracle to determine and fix the root cause, please proceed with the steps to promote the DraftSR into an open Service Request:

Log into My Oracle Support
Click on "Service Requests" in the menu area
In the "Draft Service Requests" section, click on Service Request Number <<DraftSR Number>>
Step 1 of the SR Create process will already have the Problem Summary, Problem Details and information pertaining to the Product and Configuration pre-populated. Validate that everything is accurate and all required fields are input.
Select "Next".
Select "Hardware Errors or Suspected Failures" from the pull down menu then select the sub-category selection of "Other Issues".
You will then be prompted to upload an explorer and snapshot for further analysis by Oracle Service.
Select "Next".
Validate the SR severity, your contact information, and the Ship-To Address.
Click "Submit" to complete the SR Create process and an Oracle Support Engineer will be assigned the SR to provide further assistance.

Attachments

This solution has no attachment