SL3000 - Module Identification Block / Frame Label Information

Asset ID:	1-79-1566556.1
Update Date:	2017-07-14
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1566556.1 : SL3000 - Module Identification Block / Frame Label Information

Applies to:

Sun StorageTek SL3000 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

SL3000
Module Identification Labels

Purpose

To describe the contents of the Module Identification Block labels attached (or to be attached) to SL3000 module frames.

Scope

Field Engineers

Support Engineers

Engineers involved in building or replacing SL3000 frames

Details

Module Identification labels are attached to plastic plates inserted into specific 4 cell arrays in the rear wall of each SL3000 frame and describe to the system at initialization the configuration and capacity of the SL3000. There are four labels per frame. These 4 labels constitute a 'Module Identification Block'. During initialization the robot travels down the library reading these blocks. If there is a mismatch between the Module Identification blocks and the actual hardware, the library will fail to initialize. Each MIB contains a symbol, a definition of the module type, a Barcode which translates to the frame type and a Description.

Label Description:-

Symbol   Definition      Barcode       Description

STAR        Module       BDM01       Base Drive Module 01
                   DEM01       Drive Expansion Module 01
                                 CEM01        Cartridge Expansion Module 01
                                 PEM01       Parking Expansion Module 01
                                 AEM01       Access Expansion Module 01

TRIANGLE   Back Wall DRV01       Back Wall 8 Drives
                                 DRV02       Back Wall 16 Drives
                                 DRV03       Back Wall 24 Drives
                                 DRV04       Back Wall 32 Drives
                                 BWARY       Back Wall Arrays
                                 BWB01       Back Wall Bulk Load Magazines
                                 BWEMP       Back Wall – EMPTY

CIRCLE   Front Wall     FWARY       Front Wall Arrays
                                 CAP           Front Wall CAP
                                 FWCWN       Front Wall Window (in place of CAP)
                                 FWEMP       Front Wall – EMPTY
                                 FWB01       Front Wall Bulk Load Magazine

SQUARE   Optional       OPARY        Option   - Arrays
                                 OPWIN        Option   - Operator Panel or Window
                                 OPEMP        Option   - Empty
                                 OPSRV       Option   - Service Bay (AEM Only)

(Each Barcode also contains a trailing '/'. This is not visible but is read by the Tallbot)

For full details and examples see the SL3000 Installation Manual (Internal only).

Attachments

This solution has no attachment