M10-i2c.device_pcibox_linkbrd_linkcable - I2C access failure to I2C devices on a link cable when starting a PCI expansion box

Asset ID:	1-79-1537679.1
Update Date:	2016-01-06
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1537679.1 : M10-i2c.device_pcibox_linkbrd_linkcable - I2C access failure to I2C devices on a link cable when starting a PCI expansion box

Applies to:

Fujitsu M10 PCI Expansion Unit
Fujitsu M10-1
Fujitsu M10-4
Fujitsu M10-4S
SPARC

Purpose

Provide additional information for message ID: M10-i2c.device_pcibox_linkbrd_linkcable

Fujitsu fault codes:

11000048, 1100004F, 11000054

Details

Type

: Hardware Fault; i2c.device_pcibox_linkbrd_linkcable

Severity

: Major

Description

Fault due to I2C access failure to I2C devices on a link cable when starting a PCI expansion box.

These devices can no longer be accessed or controlled by the PCI expansion box firmware.

Automated Response

: The PCI expansion box will not start. The platform administrator should schedule a service action.

Impact

: Nothing is deconfigured.

Indicted Hardware

The link cable is specified as faulty.

There is slight chance the IOB is at fault, but these FRUs do not appears on the FRU field.

Suggested Action for System Administrator

: The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

Attachments

This solution has no attachment