Fujitsu M10-4
 
Fujitsu M10-1
 
Fujitsu M10 PCI Expansion Unit
 
Fujitsu M10-4S
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M10-i2c.device_pcibox_linkbrd

1100004E, 11000053

Details

Type

Hardware Fault

   i2c.device_pcibox_linkbrd

Severity

Major

Description

Fault due to I2C access failure to I2C devices on an link board in a PCI expansion box.

The devices that are accessible are:

- sensors:

- LED controllers;
- controllers:
- I2C switches;

- seeprom:

- FRUID SEEPROMs.

These devices can no longer be accessed or controlled by the PCI expansion box firmware.

Automated Response

No immediate action is taken.

Impact

Nothing is deconfigured.

Indicted Hardware

The link board in the PCI expansion box is specified as faulty.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

This solution has no attachment