Fujitsu M10-4
 
Fujitsu M10-1
 
Fujitsu M10-4S
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

References

Applies to:

Purpose

Provide additional information for message ID: M10-memory.block.pce

Fujitsu fault codes:

02001409, 05034100, 05034101, 05034102, 05034103, 05034104,
05034105, 05034200, 05034201, 05034202, 05034203, 05034204, 05034205,
05034206, 05034207, 05034208, 05034306, 05034307, 05034308

Details

Type

Hardware Fault

   memory.block.pce

Severity

Minor

Description

Fault due to number of DIMM permanent correctable errors (PCEs) exceeds threshold.

Automated Response

No immediate action is taken. No further PCEs will be reported for this DIMM, and no additional 256MB blocks will be mapped out. It is expected that the domain will take appropriate action.

Impact

The DIMM is marked for replacement. The 256MB memory chunk that contains the permanent correctable error is deconfigured after the domain reboots.

Indicted Hardware

The DIMM is marked for replacement. It is also possible that the DIMM is not seated correctly.

For M10-1 systems, there is a slight chance the MBU is at fault, and this will be listed as the second suspect FRU.

For M10-4/4S systems, there is a slight chance the CMUU or CMUL is at fault, and this will be listed as the second suspect FRU.

Suggested Action for System Administrator

The recommended service action for this event is to schedule replacement of the affected component(s) at the earliest possible convenience. Although the hardware may be functioning, it is not intended nor recommended that the faulted component(s) remain in the system for a prolonged period of time.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for Fujitsu M10 Diagnosis (Doc ID 1525156.1)

This solution has no attachment