| Asset ID: |
1-79-1297866.1 |
| Update Date: | 2017-09-22 |
| Keywords: | |
Solution Type
Predictive Self-Healing Sure
Solution
1297866.1
:
USB-8000-F6 Software defect
| Related Items |
- SPARC T8-1
- SPARC T8-4
- SPARC T7-4
- Oracle SuperCluster M7 Hardware
- SPARC M7-8
- SPARC M8-8
- SPARC T8-2
- SPARC T7-2
- Oracle SuperCluster M8 Hardware
- SPARC M7-16
- SPARC T7-1
|
| Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
|
In this Document
Applies to:
SPARC T7-2
SPARC T7-4
Oracle SuperCluster M7 Hardware
SPARC M7-8
SPARC M7-16
Information in this document applies to any platform.
Purpose
Provide additional information for message ID: USB-8000-F6
Details
Type:
Software Defect
defect.io.usb.driver
Severity:
Major
Description
The message ID: USB-8000-F6 indicates that the fault management function running on the host system has determined that a problem was detected in the USB driver.
Automated Response
Devices associated with this driver may have been disabled or cannot fully operate
Impact
The USB function that was supplied by the USB devices associated with this driver may no longer be available.
Suggested Action for System Administrator
A problem with the USB interface has been encountered that requires additional analysis to determine the suspect component. A Service Request should be submitted.
Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.
PSH Procedural Article for SolarisFMA-Based Diagnosis (Doc ID 1173733.1)
Note: M7-8/16 systems - The above instructions do not apply to these systems. Please contact your service provider for further investigation.
Attachments
This solution has no attachment
