SPT-8000-SP - PSU configured with AC low-line

Asset ID:	1-79-1161886.1
Update Date:	2017-09-22
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1161886.1 : SPT-8000-SP - PSU configured with AC low-line

Applies to:

SPARC T7-1
SPARC T7-2
SPARC T7-4
Sun Microsystems > Servers
Information in this document applies to any platform.

Purpose

Additional information for SPT-8000-SP - PSU configured with AC low-line.

Details

Type: Fault

fault.chassis.power.ac-low-line

Severity: Major

Description

The message ID: SPT-8000-SP indicates that the fault management function running on the service processor has determined the AC input to the PSUs are not configured properly for server operation.

Refer to the procedures described in the document referenced under "Suggested Action for System Administrator".

Automated Response

Power supply will operate at higher loads and operate more efficiently.

Impact

Power supply is not be capable of providing sufficient power to operate server.

Suggested Action for System Administrator

This event is an alert intended to inform the user about a problem that is not typically associated with a fault in the product. Alerts do not normally require Oracle Services for resolution. The administrator should review the ILOM event log for additional information pertaining to this diagnosis and determine proper action. Reference the Platform Installation Guide, Electrical Specification section, for the proper voltage operating range.

Should the administrator be unable to resolve the issue, use the following link for additional information for steps necessary to contact Oracle Service.

PSH Procedural Article for ILOM-Based Alerts (Doc ID 1162995.1)

Attachments

This solution has no attachment