SPT-8000-Q2 - SP Failure

Asset ID:	1-79-1161874.1
Update Date:	2017-09-22
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1161874.1 : SPT-8000-Q2 - SP Failure

Applies to:

SPARC T7-1
Sun Microsystems > Servers
SPARC T7-2
SPARC T7-4
SPARC T8-1
Information in this document applies to any platform.

Purpose

Additional Information for SPT-8000-Q2 - SP Failure.

Details

Type: Fault

fault.sp.failed

Severity: Major

Description

The message ID: SPT-8000-Q2 indicates that the fault management function running on the service processor has determined the service processor is unable to provide platform services to the host operating system.

The SP experiencing the fault can be identified following the procedures described in the document referenced under "Suggested Action for System Administrator".

Automated Response

Fault is for informational puposes and does not affect the status of the host OS.

Impact

The Host will still be able to power on, however some services will be degraded.

Suggested Action for System Administrator

The administrator should arrange to have the faulty SP replaced.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

Attachments

This solution has no attachment