SPARC M8-8
 
SPARC M7-8
 
SPARC T7-4
 
Oracle SuperCluster M7 Hardware
 
SPARC T8-2
 
SPARC T7-2
 
Oracle SuperCluster M8 Hardware
 
SPARC M7-16
 
SPARC T7-1
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

Description

Automated Response

Impact

Suggested Action for System Administrator

References

Applies to:

Purpose

Additional information for SPT-8000-PX - Component configuration fault.

Details

Type:  Fault

            fault.component.misconfigured

Severity:  Major

Description

The message ID: SPT-8000-PX indicates that the fault management function running on the service processor has determined that a FRU has been inserted into a location where it is not supported.

The FRU must be removed to resolve the problem.

The specific FRU  experiencing the fault can be identified following the procedures described in the document referenced under "Suggested Action for System Administrator".

Automated Response

The service required LED on the chassis may be illuminated.

Impact

The FRU may not be usable in its current location.

Suggested Action for System Administrator

This event is an alert intended to inform the user about a problem that is not typically associated with a fault in the product. Alerts do not normally require Oracle Services for resolution. The administrator should review the ILOM event log for additional information pertaining to this diagnosis, determine which FRU is affected and take action to have the FRU removed.

Should the administrator be unable to resolve the issue, use the following link for additional information for steps necessary to contact Oracle Service.

PSH Procedural Article for ILOM-Based Alerts (Doc ID 1162995.1)

This solution has no attachment