SPT-8000-T5 - PSU configured with AC low-line

Asset ID:	1-79-1161867.1
Update Date:	2016-05-11
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1161867.1 : SPT-8000-T5 - PSU configured with AC low-line

Applies to:

SPARC M7-8
Sun Microsystems > Servers
SPARC M7-16
SPARC T7-1
SPARC T7-2
Information in this document applies to any platform.

Purpose

Additional informtion for SPT-8000-T5 - PSU configured with AC low-line.

Details

Type: Fault

fault.chassis.power.inadequate

Severity: Critical

Description

The message ID: SPT-8000-T5 indicates that the fault management function running on the service processor has determined that a Server power-on was attempted on a system where one or more PSUs have low-line AC input and will not be able to supply enough power.

Server will not be allowed to power-on, as PSU's will be unable to supply enough power.

Power supplies plugged into a 110-volt outlet will operate at higher loads and operate more efficiently.

Please see the procedures described in the document referenced under "Suggested Action for System Administrator".

Automated Response

Power-on attempt will be denied.

Impact

Server will not be allowed to power-on.

Suggested Action for System Administrator

This event is an alert intended to inform the user about a problem that is not typically associated with a fault in the product. Alerts do not normally require Oracle Services for resolution. The administrator should review the ILOM event log for additional information to determine the affected power supplies.

Should the administrator be unable to resolve the issue, use the following link for additional information for steps necessary to contact Oracle Service.

PSH Procedural Article for ILOM-Based Alerts (Doc ID 1162995.1)

Attachments

This solution has no attachment