SPT-8000-LC - Power Supply voltage failure

Asset ID:	1-79-1161834.1
Update Date:	2017-09-21
Keywords:

Solution Type Predictive Self-Healing Sure

Solution 1161834.1 : SPT-8000-LC - Power Supply voltage failure

Applies to:

Sun Microsystems > Servers
SPARC M7-8
SPARC M7-16
SPARC T7-1
SPARC T7-2
Information in this document applies to any platform.

Purpose

Additional information for SPT-8000-LC - Power Supply voltage failure.

Details

Type: Fault

fault.chassis.power.volt-fail

Severity: Critical

Description

The message ID: SPT-8000-LC indicates that the fault management function running on the service processor has determined that a Power Supply voltage level is outside of acceptable limits.

The Service Required LED on the PS may be illuminated.

The specific power supply experiencing the fault can be identified following the procedures described in the document referenced under "Suggested Action for System Administrator".

Blade Products Note:
Blade products report this event, which is diagnosed by the service processor in the enclosure (CMM). It is intended as an informational event (an Alert) for blades and should not by itself be considered an event requiring service.

Automated Response

The service required LED on the chassis and on the affected Power Supply may be illuminated.

Impact

Server will be powered down when there are insufficient operational power supplies

Suggested Action for System Administrator

The administrator should arrange to have the faulty power supply replaced.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

Blade Products Note:
This event is not a serviceable event for blades and should self-clear when the fan speed comes back within the specified range. However, should the condition be persistent, use the information from the above link in Section B Submitting a Service Request, sub-section Submitting a Service Request via the Support Center to request service.

Attachments

This solution has no attachment