SPARC T8-1
 
SPARC T8-4
 
SPARC T7-4
 
Oracle SuperCluster M7 Hardware
 
SPARC M8-8
 
Netra SPARC T4-1 Server
 
SPARC M7-8
 
SPARC T8-2
 
SPARC T7-2
 
Oracle SuperCluster M8 Hardware
 
SPARC M7-16
 
SPARC T7-1
 
SPARC T5-4
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

In this Document

Purpose

Details

Description

Automated Response

Impact

Suggested Action for System Administrator

References

Applies to:

Purpose

Additional Information for SPT-8000-DH - Voltage fail.

Details

Type:

           Fault
           fault.chassis.voltage.fail

Severity:

           Critical

Description

The message ID: SPT-8000-DH indicates that the fault management function running on the service processor has determined that a voltage  is operating outside of the allowable range.
The Chassis service required LED  is illuminated along with the specific FRU if possible..

The specific FRU experiencing the fault can be identified following the procedures described in the document referenced under "Suggested Action for System Administrator".

Automated Response

The system will be powered off. The chassis-wide service required LED will be illuminated.

Impact

The system is not usable until repaired. ILOM will not allow the system to be powered on until repaired.

Suggested Action for System Administrator

The administrator should arrange to have the faulty FRU replaced.

Refer to the following document for the latest procedures for displaying event content in preparation for submitting a service request and applying any post-repair actions that may be required.

PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)

This solution has no attachment