SPARC T8-1
 
SPARC T8-4
 
SPARC T7-4
 
SPARC T8-2
 
SPARC T7-2
 
SPARC T7-1
 
Solaris Operating System
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun PSH
 

Applies to:

Purpose

Provide additional information for message ID: ZFS-8000-CS

Details

Predictive Self-Healing Article
ZFS-8000-CS - ZFS pool failure

ZFS pool failure

Type

Fault

fault.fs.zfs.pool

Severity

Major

Description

A ZFS pool failed to open due to corrupted data or unavailable devices.

Automated Response

No automated response will occur.

Impact

The pool data is unavailable.

Suggested Action for System Administrator

This indicates that a pool could not be opened due to data corruption or missing devices. Running 'zpool status -x' will provide more detailed information about the particular failure, as in the examples below:

  

  pool: share
 state: FAULTED
status: The pool metadata is corrupted and the pool cannot be opened.
action: Recovery is possible, but will result in some data loss.
        Returning the pool to its state as of Mon Sep 28 10:24:39 2009
        should correct the problem.  Approximately 59 seconds of data
        will have to be discarded, irreversibly.  Recovery can be
        attempted by executing 'zpool clear -F share'.  A scrub of the pool
        is strongly recommended following a successful recovery.
   see: http://www.sun.com/msg/ZFS-8000-72

 scrub: none requested
config:

        NAME                       STATE     READ WRITE CKSUM
        share                      FAULTED      0     0     1  corrupted data
            c0t20000014C3F04FCFd0  ONLINE       0     0     4
            c0t20000014C3F050B6d0  ONLINE       0     0     4

 

or

pool: test
 state: FAULTED
status: One or more devices could not be used because the the label is missing 
        or invalid.  There are insufficient replicas for the pool to continue
        functioning.
action: Destroy and re-create the pool from a backup source.
   see: http://www.sun.com/msg/ZFS-8000-5E

 scrub: none requested
config:

        NAME                  STATE     READ WRITE CKSUM
        test                  UNAVAIL      0     0     0  insufficient replicas
          c0t0d0              FAULTED      0     0     0  corrupted data
          c0t0d1              ONLINE       0     0     0

errors: No known data errors  

The 'see:' field will direct you to a more detailed article explaining why the pool could not be opened.

Details

The Message ID: ZFS-8000-CS indicates a ZFS pool failure. Take the documented action to resolve the problem.

Product
Solaris Operating System

Product_uuid
596ffcfa-63d5-11d7-9886-ac816a682f92

This solution has no attachment