Diameter Signaling Router (DSR): After Switchover From Primary To DR-NOAM, SNMP Trapping Configuration Cannot Be Modified

Asset ID:	1-72-2398649.1
Update Date:	2018-05-18
Keywords:

Solution Type Problem Resolution Sure

Solution 2398649.1 : Diameter Signaling Router (DSR): After Switchover From Primary To DR-NOAM, SNMP Trapping Configuration Cannot Be Modified

Applies to:

Oracle Communications Diameter Signaling Router (DSR) - Version DSR 8.1.1 and later
Tekelec

Symptoms

Unable to modify the SNMP configuration after doing a Manual Switchover from Primary Site to DR site

Changes

Manual Switchover from Primary Site to DR site

Cause

Current Primary NOAM's (previous DR NOAM ie Site2_A) SnmpCfg table content displays the clusterId of previous Active NOAM(current DR NOAM ie Site1_A)

[admusr@Site1_NOAM_A ~]$ iqt -L SnmpCfg      [admusr@Site2_NOAM_A ~]$ iqt -L SnmpCfg
clusterId=00000                       clusterId=00000
portNum=0                                                                                   portNum=0
enableMgr[0]=Yes                                                                       enableMgr[0]=Yes
enableMgr[1]=Yes                                                                       enableMgr[1]=Yes
enableMgr[2]=Yes                                                                       enableMgr[2]=Yes
enableMgr[3]=Yes                                           enableMgr[3]=Yes
enableMgr[4]=No                                                                         enableMgr[4]=No
managers[0]=X.X.X.X:161                                                          managers[0]=X.X.X.X:161
managers[1]=X.X.X.X:161                                                          managers[1]=X.X.X.X:161
managers[2]=X.X.X.X                                                                  managers[2]=X.X.X.X
managers[3]=X.X.X.X                                                                  managers[3]=X.X.X.X
managers[4]=guiadmin                                                               managers[4]=guiadmin
mode=V2Only                                                                             mode=V2Only
secMode=authPriv                                                                      secMode=authPriv
authType=SHA1                                                                         authType=SHA1
privType=AES                       privType=AES
username=                                                                                   username=
password=                                                                                    password=
community=TKLCsnmpuser                                                       community=TKLCsnmpuser
rwcommunity=TKLCsnmpuser                                                   rwcommunity=TKLCsnmpuser
engineId=                                                                                    engineId=
flags=S                                                                                         flags=S
=================================       =================================
clusterId=A0400                                                                        clusterId=A0400
portNum=0                                                                                  portNum=0
enableMgr[0]=Yes                                                                      enableMgr[0]=Yes
enableMgr[1]=Yes                                                                      enableMgr[1]=Yes
enableMgr[2]=Yes                                                                      enableMgr[2]=Yes
enableMgr[3]=Yes                                                                      enableMgr[3]=Yes
enableMgr[4]=No                                                                        enableMgr[4]=No
managers[0]=X.X.X.X:161                                                         managers[0]=X.X.X.X:161
managers[1]=X.X.X.X:161                                         managers[1]=X.X.X.X:161
managers[2]=X.X.X.X                                                                 managers[2]=X.X.X.X
managers[3]=X.X.X.X                                                 managers[3]=X.X.X.X
managers[4]=guiadmin                                                              managers[4]=
mode=V2Only                                        mode=V2Only
secMode=authPriv                                                                     secMode=authPriv
authType=SHA1                                                                        authType=SHA1
privType=AES                                                                            privType=AES
username=                                                                                  username=
password=                                                                                   password=
community=TKLCsnmpuser                                                       community=TKLCsnmpuser
rwcommunity=TKLCsnmpuser                                                  rwcommunity=TKLCsnmpuser
engineId=                                                                                   engineId=
flags=S                                                                                        flags=S

Server_ID        NodeID            ClusterID
     0         Site1_NOAM_A          A0400
     1         Site1_NOAM_B       A0400
   2 Site2_NOAM_A       A0450
     3 Site2_NOAM_B       A0450

Solution

Bug 27984917 : "Unable to modify the SNMP config after doing a Manual SWO from P Site to DR site" is created for this issue

References

<BUG:27984917> - UNABLE TO MODIFY THE SNMP CONFIG AFTER DOING A MANUAL SWO FROM P SITE TO DR SITE

Attachments

This solution has no attachment