| Asset ID: |
1-72-2375663.1 |
| Update Date: | 2018-03-20 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
2375663.1
:
Default Route Stopped Working after an SP reset
| Related Categories |
- PLA-Support>Sun Systems>SAND>Network>SN-SND: Sun Network Ethernet Switches
|
In this Document
Created from <SR 3-16915820851>
Applies to:
Oracle Switch ES1-24 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
Can not ping to an IP address on the other side of the default router after a power cycle or SP reset.
A snoop or tcpdump on the end system showed the failed ICMP packet arriving with a source IP of 0.0.0.0, so the end system was not able to respond.
Cause
This is a defect (27668943) and triggered when ipv6 address is assigned to the default vlan 1.
Solution
Permanent fix to be released in a future firmware update (1.3.1.23). A work around is to shut down the IP interface on vlan 1 from the sefos prompt.
config t
int vlan 1
shut
end
write start
References
<BUG:27668943> - DEFAULT ROUTE STOPPED WORKING AFTER AN SP RESET
Attachments
This solution has no attachment
