| Asset ID: |
1-72-2352210.1 |
| Update Date: | 2018-01-29 |
| Keywords: | |
Solution Type
Problem Resolution Sure
Solution
2352210.1
:
Port 17 on enclosure switch registers errors
| Related Items |
- Oracle Communications Diameter Signaling Router (DSR)
|
| Related Categories |
- PLA-Support>Sun Systems>CommsGBU>Global Signaling Solutions>SN-SND: Tekelec DSR
|
In this Document
Created from <SR 3-16629248331>
Applies to:
Oracle Communications Diameter Signaling Router (DSR) - Version DSR 5.0 and later
Information in this document applies to any platform.
Symptoms
Slow data merge/replication/transfer between servers in DSR. Enclosure switch port counters show elevated Errors RX against port 17.
Cause
Port 17 from enclosure suggests it is a cable, SFP module, or peer port that may be introducing errors.
A bad cable or cable contacts can introduce transport errors in the segment, registering at one or both interfaces on the cable terminations.
Solution
Troubleshooting steps:
- replace cable
- replace SFP module, if in use
- check far-end counters/stats and duplex state
- replace far-end terminal equipment
- move to a different port, on near and/or far end
If these suggestions fail to resolve the condition, open an SR and provide a network diagram and a capture 'show tech all' (or 'show tech' if Cisco) from the switch.
Attachments
This solution has no attachment
